Corner Forming Machine For Traffic Road Signs

Corner Forming Machine For Traffic Road Signs forming prefect corners, No longer needed welding, NO set up. NO welding. NO grinding. NO finishing. NO polishing.

Traffic Road Signs

Traffic Road Signs

Traffic road sign raw materail is mainly aluminum ,thickness is 1.5-3mm and the bending flange is less than 30mm.

So it is very suitable to use corner forming machine .

Just have a hydraulic press brake 40T/2500 or a small electric press brake and a corner forming machine ,can open the business.No need welding.

The Corner Forming Machine is finished separately in two working Position.One is Corner Forming ,one is shearing .Install safety light curtain protection to make the production process more safe and humanistic, The accuracy of different thickness is controlled by Fuji servo motors, Parameters is adjusted through touch screen, some other movement is controlled by Mitsubishi PLC.A set of mould is with the machine ,including roller tool ,square tool ,shear cutter of a corner radius.

YUAN is the leading manufacturer of flexible CORNERFORMER machines for the production of cold formed corners on doors and panels without welding and grinding. This new state of the art cold forming technology is independent from the size of doors or trays to be formed and is worldwide used in various productions, as: doors for electrical cabinets, traffic-street signs, building signs, panels, covers, doors for ovens, design elements for kitchen, drip trays for air condition, covers for heating units, ceilings, bottoms for vessel in food industry, table plates, table stands and similar parts made from Mild Steel, Stainless Steel and Aluminium.

Flexible YUAN CORNERFORMER - Multiflex Machines are offered for:

- corner radius from 2 mm up to 100 mm and any corner angle from 45° up to 150°

- formable thickness of material up to 5 mm thickness (depending on machine size)

- robot connection is possible

9 seconds cycle time to form a corner of a door used for electrical cabinet – ready for painting. As special machine version even only 5 seconds. Outstanding advantages are granted through highest quality of cold formed corners in always similar quality at low production costs and less personal demand.

There are only 2 step to forming the corner:

Step1: Bending the 4side flange by special bending tools

Bending Panel